Giano light
data sheet
Plus of Giano light
The Giano light panels have passed the most severe safety tests, resistance to impacts, fixed loads and wind pressure as well as attacks from atmospheric agents.
Even in the most extreme conditions, the Giano light panels proved to be safe and unalterable.
LARGE FORMAT: MAX 3000X1000 mm
• ULTRALIGHT 18kg/m2
• IMPACT RESISTANT
• RESISTANT TO BENDING
• RESISTANT TO FREEZE-THAW
• RESISTANT TO SALT MIST
• UNALTERABLE UNDER TEMPERATURE VARIATIONS
• SUITABLE FOR CONCEALED FIXINGS
Safety and protection
Determination of the breaking load at the fixings
according to UNI EN 13364-2003
Resistance to wind load
according to ETAG 034 (ora EAD 0404:2018 paragrafo 2.2.9)
Resistance to soft body and rigid body impact
according to ETAG 034 (ora EAD 0404:2018 paragrafo 2.2.11)
Safety and protection
Accelerated corrosion in a salt spray chamber for 480 hours
according to UNI EN ISO 9227
Resistance to humid atmospheres containing sulfur dioxide for 160 hours
according to UNI EN ISO 3231
Accelerated UVA/Condensate aging for 400 hours
according to UNI EN 16474-3
Resistance to temperature variations from -20°C to +80°C every 4 hours for 168 hours
according to UNI 9429-7674
Building science
Frost resistance
according to UNI EN ISO 10545-12:2000
Resistance to temperature changes between 15 °C and 80 °C
according to UNI EN ISO 10545- 9:2013
Water absorption
according to UNI EN ISO 10545-3:2018
Determination of the linear thermal expansion coefficient between room temperature and 80 °C with a bi-thousandth mechanical deformometer
according to UNI EN 14581
Determination of bending resistance
according to UNI EN 10545-4
Determination of pull-off adhesion resistance
according to UNI EN 12004-2:2017
Prove di reazione al fuoco
Ignitability of products subjected to direct flame attack
according to EN ISO 11925-2:2020
B – s1- d0
Customized corners
WEDGES, TRIANGLES, SPECIAL CUTS… WE CREATE YOUR PROJECT TO THE MILLIMETER
The monolithic corners can be made with 90° angles or customized upon customer request by creating corners smaller or greater than 90°.
Alternatively, it is possible to make them with a 5mm shutter which highlights the corner line and makes it very resistant.
By combining slabs mounted with monolithic corners, a varied range of finished elements can be obtained, ready to be installed on site.
Giano light frees compositional creativity, allowing you to design and install structures with a massive effect with extreme lightness
The pose
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Vertical section at the substructure joint
01. “T” or “L” section aluminum upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. Aluminum bracket fixed for movable points
05. Crosspiece in extruded aluminium
06. Rivet
07. Point hook in extruded aluminium
08. Aluminum bracket fixed for fixed points
09. Mechanical anchor for load-bearing masonry
10. Self-drilling rivet/screw
11. Load-bearing masonry
12. Insulating
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Vertical section at the substructure joint
01. “T” or “L” section aluminum upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. Crosspiece in extruded aluminium
05. Rivet
06. Point hook in extruded aluminium
07. Aluminum bracket fixed for fixed points
08. Mechanical anchor for load-bearing masonry
09. Self-drilling rivet/screw
10. Load-bearing masonry
11. Insulating
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Vertical section details at the foot
01. “T” or “L” section aluminum upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. Aluminum bracket fixed for movable points
05. Crosspiece in extruded aluminium
06. Rivet
07. Point hook in extruded aluminium
08. Insulating
09. Mechanical anchor for load-bearing masonry
10. Self-drilling rivet/screw
11. Load-bearing masonry
12. Micro-perforated sheet metalwork
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Vertical section details at the top
01. “T” or “L” section aluminum upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. Aluminum bracket fixed for movable points
05. Crosspiece in extruded aluminium
06. Rivet
07. Point hook in extruded aluminium
08. Mechanical anchor for load-bearing masonry
09. Self-drilling rivet/screw
10. Load-bearing masonry
11. Insulating
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Horizontal corner section details
01. “T” or “L” section aluminum upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. Aluminum bracket for mobile/fixed points
05. Crosspiece in extruded aluminium
06. Point hook in extruded aluminium
07. Mechanical anchor for load-bearing masonry
08. Self-drilling rivet/screw
09. Load-bearing masonry
10. Insulating
Cladding with vertical structure
HIDDEN FIXING and PIN ATTACHMENT
Vertical section corresponding to the substructure joint
01. Punched L-shaped galvanized steel upright
02. Giano Lite covering, stoneware/glass finish
03. Self-drilling screw
04. Stainless steel bracket fixed for floating points
05. Stainless steel handle with fixing pin
06. L profile in shaped steel for grafting
07. Stainless steel bracket fixed for fixed points
08. Mechanical anchor for load-bearing masonry
09. Self-drilling screw
10. Load-bearing masonry
11. Insulating
Cladding with vertical structure
HIDDEN FIXING and PIN ATTACHMENT
Horizontal corner section details
01. Punched L-shaped galvanized steel upright
02. Giano Lite covering, stoneware/glass finish
03. Self-drilling screw
04. Stainless steel bracket
05. Stainless steel handle with fixing pin
06. L profile in shaped steel for grafting
07. Mechanical anchor for load-bearing masonry
08. Self-drilling screw
09. Load-bearing masonry
10. Insulating
Cladding anchored via HIDDEN FIXING on the upright and transom structure
Vertical section details at the foot
01. Punched L-shaped galvanized steel upright
02. Giano Lite covering, stoneware/glass finish
03. Self-drilling screw
04. Stainless steel bracket fixed for floating points
05. Stainless steel handle with fixing pin
06. L profile in shaped steel for grafting
07. Mechanical anchor for load-bearing masonry
08. Self-drilling rivet/screw
09. Insulating
10. Load-bearing masonry
11. Micro-perforated sheet metalwork
Cladding with vertical structure
HIDDEN FIXING and PIN ATTACHMENT
Vertical section details at the top
01. Punched L-shaped galvanized steel upright
02. Giano Lite covering, stoneware/glass finish
03. Self-drilling screw
04. Stainless steel bracket fixed for floating points
05. Stainless steel handle with fixing pin
06. L profile in shaped steel for grafting
07. Mechanical anchor for load-bearing masonry
08. Load-bearing masonry
09. Insulating
Giano light cladding anchored via The Mask system on a sandwich panel structure
Vertical section at the substructure joint
01. Punched L-shaped galvanized steel upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. TThe Mask shaped steel profile
05. Crosspiece in extruded aluminium
06. DuroPT 6×9.5 screw or rivet
07. Point hook in extruded aluminium
08. Self-drilling screw for panel fixing
sandwich
09. Sandwich panel
10. Self-drilling screw for out-of-plumb adjustment
Giano light cladding anchored via TThe Mask system on a sandwich panel structure
Horizontal corner section details
01. Punched L-shaped galvanized steel upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. TThe Mask shaped steel profile
05. Crosspiece in extruded aluminium
06. Point hook in extruded aluminium
07. Sandwich panel
Giano light cladding anchored via TThe Mask system on a sandwich panel structure
Vertical section details at the foot
01. Punched L-shaped galvanized steel upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. TThe Mask shaped steel profile
05. Self-drilling screw for out-of-plumb adjustment
06. Micro-perforated sheet metalwork
07. Closing sheet metal work
08. Foundation curb
Giano light cladding anchored via TThe Mask system on a sandwich panel structure
Vertical section details at the top
01. Punched L-shaped galvanized steel upright
02. Giano light covering, stoneware/glass finish
03. Self-drilling bolt/screw
04. TThe Mask shaped steel profile
05. Crosspiece in extruded aluminium
06. Rivet
07. Point hook in extruded aluminium
08. Self-drilling screw for fixing sandwich panel
09. Self-drilling screw for out-of-plumb adjustment
10. Sandwich panel
