Solarpan® Plus House
The 5-star housing for photovoltaic modules, excellent for integrated systems
Developed on the basis of the experience acquired during production of the SOLARPAN® PLUS panel, this innovative solution makes it possible to achieve great savings on the installation of photovoltaic modules on the roofs of domestic buildings. Just remove the roof tiles in the area where the photovoltaic system is to be installed and apply SOLARPAN® PLUS HOUSE to the existing roof supports, leaving the insulation intact. This makes it possible to distribute the panels flush with the roof, resulting in better appearance.
Furthermore, the installation of SOLARPAN® PLUS HOUSE offers a more secure way of fixing the photovoltaic modules into place, ensuring the complete absence of any infiltrations of water, the correct amount of ventilation between the panel and the surface on which it rests and reduced installation times.
In the case of new buildings, SOLARPAN® PLUS HOUSE sandwich panels with expanded polyurethane insulation can be installed, which will reinforce all of the
properties of the system and the roof itself; traditional tiles or pantiles can also be fitted on them, see detail to the side.
Available thickness:
30-40-50-60-80-100-120-150 mm.
Customize your data sheet
The online configurator allows you to obtain static values by filling in the required parameters.
THE LOAD CAPACITIES SHOWN IN THE TABLES ARE PURELY INDICATIVE. IT IS THE TASK AND RESPONSIBILITY OF THE DESIGNER APPOINTED BY THE CLIENT TO DEFINE THE LOAD-BEARING CAPACITY OR TO CARRY OUT THE RESISTANCE VERIFICATION IN THE SPECIFIC CASE BEING DESIGNED, PRODUCING A SIGNED CALCULATION REPORT.
Lattonedil SPA reserves the right to make any changes aimed at improving the product without prior notice.
Contacts
ufficiotecnico@lattonedil.it
