Isopar® Élite 500
Insulating wall panels with hidden fasteners
More often than not, the look of a wall is essential. After extensive research, now ISOPAR® is available with hidden fasteners. The panels are secured by special joints, as shown in the drawing. Now, ISOPAR® is not just practical and high quality, but it also offers the beauty of a wall with hidden fasteners.
We recommend using 0.6 mm thick steel for the external side.
Available thickness:
25-30-35-40-50-60-80-100-120 mm.
Lattonedil recommends using a steel fixing plate during installation. The plate is intended to distribute the stresses resulting from fastening and to increase resistance to compression and suction forces acting on the wall panels.
The position and number of fixing points must be defined by the designer during the design phase, based on the loads acting on the structure.
Trasmittance
Customize your data sheet
The online configurator allows you to obtain static values by filling in the required parameters.
THE LOAD CAPACITIES SHOWN IN THE TABLES ARE PURELY INDICATIVE. IT IS THE TASK AND RESPONSIBILITY OF THE DESIGNER APPOINTED BY THE CLIENT TO DEFINE THE LOAD-BEARING CAPACITY OR TO CARRY OUT THE RESISTANCE VERIFICATION IN THE SPECIFIC CASE BEING DESIGNED, PRODUCING A SIGNED CALCULATION REPORT.
Lattonedil SPA reserves the right to make any changes aimed at improving the product without prior notice.
Contacts
ufficiotecnico@lattonedil.it
