Isopar® Elegant
Insulating wall panels with hidden fasteners
The look of a wall is important. Lattonedil® combines the beauty of an architectural wall with hidden fasteners and the practicality of a modular design. The maze-like design and the hot-cut joint with a special housing for the fasteners offers an excellent aesthetic result, with the fasteners completely hidden from view, keeping airflows and cold bridges away. Ideal for false ceilings and insulated walls. For panel with a smooth finish, we recommend using a 0.6 mm thik steel ssupport.
Available thickness:
50-60-80-100-120-150-180-200-220-240 mm.
Lattonedil recommends using a steel fixing plate during installation. The plate serves to distribute the stresses from fastening and to increase resistance to compression and suction forces acting on the wall panels.
The position and number of fixing points must be determined by the designer during the design phase, based on the loads acting on the structure.
Certificate
Trasmittance
Customize your data sheet
The online configurator allows you to obtain static values by filling in the required parameters.
THE LOAD CAPACITIES SHOWN IN THE TABLES ARE PURELY INDICATIVE. IT IS THE TASK AND RESPONSIBILITY OF THE DESIGNER APPOINTED BY THE CLIENT TO DEFINE THE LOAD-BEARING CAPACITY OR TO CARRY OUT THE RESISTANCE VERIFICATION IN THE SPECIFIC CASE BEING DESIGNED, PRODUCING A SIGNED CALCULATION REPORT.
Lattonedil SPA reserves the right to make any changes aimed at improving the product without prior notice.
Contacts
ufficiotecnico@lattonedil.it
