30
You are here:

Isocurvo® Raggio fisso

In sintered polystyrene (EPS)

TECHNICAL FEATURES:
Extrados:
Consisting of:
− Galvanised steel by continuous hot dipping SENDZIMIR system
(UNI EN 10346) and pre-painted on continuous lines with different
paint cycles depending on end use.
− 3000 or 5000 series aluminium alloys with pre-painted finish with the cycles above or natural.
− Steel sheet metal protected with aluminium-zinc-silicon alloy (aluzinc)
Core
Made of EPS, i.e., sintered expanded polyester, its effective thermal resistance is due to its closed cell structure, which is mostly composed of air; it is also vapour permeable and at the same time impermeable to water, non-toxic and recyclable.
Intrados 
Consisting of:
− Galvanised steel by continuous hot dipping SENDZIMIR system
(UNI EN 10346) and pre-painted on continuous lines with different
paint cycles depending on end use. Embossed finish.
Panel development (extrados)
RADIUS 3300 mm: from 1300 mm to 4350 mm
RADIUS 6000 mm: from 1300 mm to 5250 mm

Download the technical data sheet

Certifications

Broof-T3
Broof-T4

Transmittance

Customize your technical data sheet

The online configurator allows you to obtain static values ​​by choosing from the suggested parameters.

The load capacities provided in the tables are purely indicative. It is the duty and responsibility of the designer appointed by the client to determine the load-bearing capacity or to perform a structural resistance verification for the specific project in question, and to produce a signed structural calculation report.

Lattonedil SPA reserves the right to make any modifications aimed at improving the product, without prior notice.

Contact
ufficiotecnico@lattonedil.it