Isopar® Elegant HP
Polyisocyanurate insulating wall panel
ISOPAR® Elegant HP is an insulating sandwich panel suitable for walls that require a high degree of reaction to fire.
ISOPAR® Elegant HP is the polyisocyanurate flat panel available in the staved, scored, smooth and diamond versions.
Available thickness:
50-60-80-100-120-150-180-200-220-240 mm.
Lattonedil recommends using a steel fixing plate during the installation phase. The plate is designed to distribute the stresses resulting from fastening and to increase resistance to compression and suction forces acting on wall panels.
The position and number of fixing points must be defined by the designer during the design phase, based on the loads acting on the structure.
Certificate
Trasmittance
Customize your data sheet
The online configurator allows you to obtain static values by filling in the required parameters.
THE LOAD CAPACITIES SHOWN IN THE TABLES ARE PURELY INDICATIVE. IT IS THE TASK AND RESPONSIBILITY OF THE DESIGNER APPOINTED BY THE CLIENT TO DEFINE THE LOAD-BEARING CAPACITY OR TO CARRY OUT THE RESISTANCE VERIFICATION IN THE SPECIFIC CASE BEING DESIGNED, PRODUCING A SIGNED CALCULATION REPORT.
Lattonedil SPA reserves the right to make any changes aimed at improving the product without prior notice.
Contacts
ufficiotecnico@lattonedil.it
